H3C S5500-EI Series Installation Manual

1-19
Table 1-17 SFP transceivers supported by GE SFP interface module
Transceiver
Central
wavelength
Connect
or
Fiber
Max transmission
distance
50/125 µm
multimode optical
fiber
550 m (1804.5 ft)
SFP-GE-SX-MM850-A 850 nm LC
62.5/125 µm
multimode optical
fiber
275 m (902.2 ft)
SFP-GE-LX-SM1310-A
10 km (about 6.2
mi)
SFP-GE-LH40-SM1310
1310 nm LC
40 km (about 24.9
mi)
SFP-GE-LH40-SM1550
40 km (about 24.9
mi)
SFP-GE-LH70-SM1550
1550 nm LC
9/125 µm single
mode optical fiber
70 km (about 43.5
mi)
SFP-GE-LX-
SM1310-BIDI
TX: 1310 nm
RX: 1490 nm
SFP-GE-LX-
SM1490-BIDI
Note that
these two
transceiver
models
should be
used in
pairs.
TX: 1490 nm
RX: 1310 nm
LC
9/125 µm single
mode optical fiber
10 km (about 6.2
mi)
z You are recommended to use SFP transceivers of H3C on the S5500-EI series.
z The types of SFP transceivers may update with time. For information about transceivers, contact
H3C technical support or marketing staff.
z For the models and specifications of each kind of transceivers, refer to H3C Low End Series
Ethernet Switches Pluggable Modules Manual.
Short-haul Dual-Port 10 GE CX4 Interface Module
Figure 1-14 Short-haul dual-port 10 GE CX4 interface module

H3C S5500-EI Series Specifications

General

Brand	H3C
Model	S5500-EI Series
Category	Switch
Language	English