H3C S5500-EI Series Installation Manual

1-21
Figure 1-18 Front panel of dual-port 10 GE SFP+ interface module
A dual-port 10 GE SFP+ interface module provides two 10 Gbps SFP+ ports. You can insert an SFP+
transceiver into the port to connect it to another SFP+ port through an optical fiber, or an SFP+ cable
provided by H3C. For details about the supported SFP+ transceivers and SFP+ cables, refer to
Table
1-19.
Table 1-19 SFP+ transceivers and SFP+ cables supported by dual-port 10 GE SFP+ interface module
Transceiver
/Cable type
Transceiver
/Cable
Central
wavelength
Connector Fiber
Max
transmission
distance
SFP-XG-SX-
MM850-A
850 nm
50/125 µm multimode
optical fiber
300 m
(984.25 ft.)
SFP-XG-LX
220-MM131
0
62.5/125 µm
multimode optical
fiber
220 m
(721.78 ft.)
10 GE SFP+
transceiver
SFP-XG-LX-
SM1310
1310 nm
LC
9/125 µm single mode
optical fiber
10 km (6.21
mi)
LSWM1STK
0.65 m (2.13
ft.)
LSWM2STK
1.2 m (3.94
ft.)
Short-haul
10 GE SFP+
cable
LSWM3STK
— — SFP+ cable
3 m (9.84 ft.)
Figure 1-19 SFP+ cable
Handle
Handle
Connector 1
Connector 2

H3C S5500-EI Series Specifications

General

Brand	H3C
Model	S5500-EI Series
Category	Switch
Language	English