To Next Page

To Previous Page

4-7

Item Description

3. Display all files in flash Display all files in the flash memory

4. Delete file from flash Delete files from the flash memory

5. Modify bootrom password Modify the Boot ROM password

6. Enter bootrom upgrade menu Enter the Boot ROM update menu

7. Skip current configuration file

Skip the current configuration file (this configuration is

valid once)

8. Set bootrom password recovery Restore the Boot ROM password

9. Set switch startup mode Set the startup mode of the switch

0. Reboot Restart the switch

z If you perform no operation or press a key other than Ctrl + B within one second, Once the

remaining waiting time becomes zero, the system begins to automatically start up and the following

information is displayed:

Auto-booting...

Decompress Image................................................................

................................................................................

...........................................OK!

User interface aux0 is available.

Press ENTER to get started.

The appearance of "Press ENTER to get started" indicates that the automatic startup of the switch is

complete.

Press Enter. The following prompt is displayed:

You can configure the switch now.

H3C S5500-EI Series Installation Manual

Other manuals for H3C S5500-EI Series