H3C S5500-EI Series Installation Manual

4-10
Subslot 1 (LSP2CX2P) selftest..............OK!
Please check leds....................FINISHED!
User interface aux0 is available.
Press ENTER to get started.
The appearance of "Press ENTER to get started" indicates that the automatic startup of the switch is
complete.
Press Enter. The following prompt is displayed:
<Sysname>
You can configure the switch now.
The H3C Series switches provide abundant command views. For detailed descriptions about the
configuration commands and CLI, refer to H3C S5500-EI Series Ethernet Switches Operation Manual
and H3C S5500-EI Series Ethernet Switches Command Manual.

H3C S5500-EI Series Specifications

General

Brand	H3C
Model	S5500-EI Series
Category	Switch
Language	English