9
Item Requirements
For the operating voltage range, see S5130S-EI Switch Series Hardware
Information and Specifications.
Power receptacle and
cables
• If the external power supply system provides an AC power outlet, use a
country-specific AC power cord. Make sure the PE wire of the AC power
supply is grounded reliably.
•
If the external power supply system provides a DC distribution box, prepare
DC power cords yourself.
• Do not use the power cord provided with the switch on other devices.
Laser safety
Disconnected optical fibers or
transceiver modules might emit invisible laser light. Do not stare into
beams or view directly with optical instruments when the switch is operating.
The switch is Class 1 laser device.
Installation tools
No installation tools are provided with the switch. Prepare them yourself as required.
Flat-blade screwdriver
Phillips screwdriver
ESD wrist strap
Needle-nose pliers
Diagonal pliers
Crimping pliers
Marker
To Next Page
Loading...
