EasyManuals Logo

H3C S5560S-SI Series User Manual

H3C S5560S-SI Series
51 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #39 background imageLoading...
Page #39 background image
37
connect a network device, a Telnet site, or an SSH site. For more information about the terminal
emulator programs, see the user guides for these programs.
The following are the required terminal settings:
Bits per second9,600.
Data bits—8.
Stop bits—1.
ParityNone.
Flow controlNone.
Starting the switch
Pre-start checklist
Before powering on the switch, verify that the following conditions are met:
The power cord is correctly connected.
The input power voltage meets the requirement of the switch.
The console cable is correctly connected.
The configuration terminal (a PC, for example) has started, and its serial port settings are
consistent with the console port settings on the switch.
Powering on the switch
During the startup process, you can access Boot ROM menus to perform tasks such as software
upgrade and file management. The Boot ROM interface and menu options differ with software
versions. For more information about Boot ROM menu options, see the software-matching release
notes for the device.
After the startup completes, you can access the CLI to configure the switch.
For more information about the configuration commands and CLI, see the configuration guides and
command references for the switch series.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the H3C S5560S-SI Series and is the answer not in the manual?

H3C S5560S-SI Series Specifications

General IconGeneral
BrandH3C
ModelS5560S-SI Series
CategorySwitch
LanguageEnglish

Related product manuals