EasyManuals Logo

H3C S7500E Series Configuration Guide

H3C S7500E Series
112 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #18 background imageLoading...
Page #18 background image
1-8
z You cannot create a rule with, or modify a rule to have, the same permit/deny statement as an
existing rule in the ACL.
z When the ACL match order is auto, a newly created rule will be inserted among the existing rules
in the depth-first match order. Note that the IDs of the rules still remain the same.
You can modify the match order of an ACL with the acl number acl-number [ name acl-name ]
match-order { auto | config } command but only when it does not contain any rules.
Configuring an IPv6 basic ACL
Follow these steps to configure an IPv6 basic ACL:
To do… Use the command… Remarks
Enter system view
system-view
––
Create an IPv6 basic ACL view
and enter its view
acl ipv6 number
acl6-number
[
name
acl6-name ] [
match-order
{
auto
|
config
} ]
Required
By default, no ACL exists.
IPv6 basic ACLs are numbered in
the range 2000 to 2999.
You can use the
acl
ipv6
name
acl6-name command to enter the
view of an existing named IPv6
ACL.
Configure a description for the
IPv6 basic ACL
description
text
Optional
By default, an IPv6 basic ACL has
no ACL description.
Set the rule numbering step
step
step-value
Optional
5 by default
Create or edit a rule
rule
[ rule-id ] {
deny
|
permit
}
[
fragment
|
logging
|
source
{ ipv6-address prefix-length |
ipv6-address/prefix-length
| any
} |
time-range
time-range-name ]*
Required
By default, an IPv6 basic ACL
does not contain any rule.
To create or edit multiple rules,
repeat this step.
Note that the
logging
and
fragment
keywords are not
supported if the ACL is to be
referenced by a QoS policy for
traffic classification.

Table of Contents

Other manuals for H3C S7500E Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the H3C S7500E Series and is the answer not in the manual?

H3C S7500E Series Specifications

General IconGeneral
BrandH3C
ModelS7500E Series
CategorySwitch
LanguageEnglish

Related product manuals