H3C UniServer R4300 G6

4
Table 2 Storage controller configuration tasks
Task type
Option
Description
Information
query
Physical/Virtual Device
Information
Display summary and detailed information about
installed physical drives and logical drives.
Controller Information
Display detailed information about the storage
controller.
RAID
configuration
Create RAID Configuration Create RAIDs.
Delete RAID Configuration Delete RAIDs.
Rebuild RAID Configuration Rebuild RAIDs.
Erase Physical Disk Erase physical drives.
Configuring RAID 0
1. Access the storage controller configuration screen, select Create RAID Configuration, and
press Enter.
Figure 4 Storage controller configuration screen
2. Select two member drives, select Next, and press Enter.