102
Figure 101 ARP Table configuration page
Creating a static ARP entry
1. Select Network > ARP Management from the navigation tree to enter the default ARP Table page
shown in Figure 101.
2. Cli
ck Add to enter the New Static ARP Entry page, as shown in Figure 102.
Figure 102 Add a static ARP entry
3. Configure the static ARP entry as described in Table 48.
4. Click Apply.
Table 48 Configuration items
Item Descri
tion
IP Address Enter an IP address for the static ARP entry.
MAC Address Enter a MAC address for the static ARP entry.
To Next Page
Loading...
