H3C WA2610E-AGN - Adding a Class

368
Ste
p
Remarks
6. Configuring classifier-behavior associations for
the policy
Required.
Associate a traffic behavior with a class in the QoS
policy.
You can associate a class with only one traffic behavior
in a QoS policy. If a class is associated with multiple
traffic behaviors, the last associated one takes effect.
7. Apply the policy
 Applying a policy to a port
 Applying a QoS policy to a wireless service
Use either approach.
Apply the QoS policy to a port or a wireless service.
Adding a class
1. Select QoS > Classifier from the navigation tree.
2. Click the Add tab to enter the page for adding a class.
Figure 395 Adding a class
3. Configure the class information as described in Table 120.
4. Click Add.
Table 120 Configuration items
Item Descri
p
tion
Classifier Name Specify a name for the classifier to be added.