H3C WA2610E-AGN - Configuring a Guest; Procedure for a Management Level Administrator to Configure a Guest

235
Table 89 Configuration items
Item Descri
p
tion
Group-name Specify a name for the user group.
Level
Select an authorization level for the user group, which can be Visitor, Monitor,
Configure, or Management, in ascending order of priority.
VLAN
Specify the VLAN to be authorized to a user in the user group after the user passes
authentication.
ACL
Specify the ACL to be used by the access device to restrict the access of a user in the
user group after the user passes authentication.
User-profile
Specify the user profile for the user group.
IMPORTANT:
The AP does not support specifying a user profile.
Allow Guest
Accounts
Specify whether to allow a guest to join the user group.
IMPORTANT:
User group system is an optional group of guest accounts by default, and cannot be
modified.
Configuring a guest
Two types of users can configure guests: guest administrators and common users of the management
level.
NOTE:
For information about user type and authorization level, see Table 88.
Procedure for a management level administrator to configure a
guest
1. Select Authentication > Users from the navigation tree.
2. Click the Guest tab to enter the guest management page.
Figure 230 Guest management page