H3C WA2610E-AGN - Configuring Clear Type Wireless Service

267
Figure 268 Create a wireless service
3. Configure the wireless service as described in Table 95.
4. Click Apply.
Table 95 Configuration items
Item Descri
p
tion
Wireless Service Name
Set the service set identifier (SSID).
An SSID should be as unique as possible. For security, the company name
should not be contained in the SSID. Meanwhile, it is not recommended to use
a long random string as the SSID, because it only adds the Beacon frame
length and usage complexity, without any improvement to wireless security.
Wireless Service Type
Select the wireless service type:
• clear: Indicates the SSID is not encrypted.
• crypto: Indicates the SSID is encrypted.
Configuring clear type wireless service
Configuring basic settings for the clear type wireless service
1. Select Wireless Service > Access Service from the navigation tree.
2. Click the icon corresponding to the target clear type wireless service.
The page for configuring the wireless service appears.