H3C WA2610E-AGN - Wireless Configuration

6
Figure 4 IP configuration page
2. Configure the parameters as described in Table 5.
Table 5 Configuration items
Item Descri
p
tion
IP Address
Specify the IP address of VLAN-interface 1. This IP address is used for logging in to
the device.
By default, the IP address of VLAN-interface 1 is 192.168.0.50 .
Mask
Specify the IP address mask of VLAN-interface 1.
By default, the mask is 24-bit long.
Default Gateway
Specify the IP address of the default gateway that connects the device to the
network.
By default, no default gateway is available.
Wireless configuration
1. On the IP configuration page, click Next.
The wireless configuration page appears.