H3C WA2610E-AGN - Adding an Ipv4 ACL

352
Figure 386 Adding a time range
3. Configure the time range information.
4. Click Apply.
Table 111 Configuration items
Item Descri
p
tion
Time Range Name Set the name for the time range.
Periodic
Time
Range
Start Time Set the start time of the periodic time range.
These items are
available after
you select the
Periodic Time
Range option.
End Time
Set the end time of the periodic time range. The end time must be
greater than the start time.
Sun, Mon,
Tue, Wed,
Thu, Fri,
and Sat.
Select the day or days of the week on which the periodic time
range is valid. You can select any combination of the days of the
week.
Absolute
Time
Range
From
Set the start time of the absolute time range. The time of the day
is in the hh:mm format (24-hour clock), and the date is in the
MM/DD/YYYY format.
These items are
available after
you select the
Absolute Time
Range option.
To
Set the end time of the absolute time range. The time of the day
is in the hh:mm format (24-hour clock), and the date is in the
MM/DD/YYYY format. The end time must be greater than the
start time.
Adding an IPv4 ACL
1. Select QoS > ACL IPv4 from the navigation tree.