H3C WA2610E-AGN - Adding a Policy; Configuring Classifier-Behavior Associations for the Policy

376
Item Descri
p
tion
Filter
Configure the packet filtering action.
After selecting the Filter option, select one item in the following list:
• Permit—Forwards the packet.
• Deny—Drops the packet.
• Not Set—Cancels the packet filtering action.
Accounting
Configure the traffic accounting action.
Select the Accounting option and select Enable or Disable in the
following list to enable/disable the traffic accounting action.
IMPORTANT:
This configuration item is not supported.
Adding a policy
1. Select QoS > QoS Policy from the navigation tree.
2. Click the Add tab to enter the page for adding a policy.
3. Set the policy name.
4. Click Add.
Figure 399 Adding a policy
Configuring classifier-behavior associations for the policy
1. Select QoS > QoS Policy from the navigation tree.
2. Click the Setup tab to enter the page for setting a policy.