H3C WA2610E-AGN - Configuring an SNMP View; Creating an SNMP View

72
Table 37 Configuration items
Item Descri
p
tion
SNMP Enable or disable SNMP agent.
Local Engine ID
Configure the local engine ID.
The validity of a user after it is created depends on the engine ID of the SNMP
agent. If the engine ID when the user is created is not identical to the current
engine ID, the user is invalid.
Maximum Packet Size
Configure the maximum size of an SNMP packet that the agent can
receive/send.
Contact
Set a character string to describe the contact information for system
maintenance.
If the device is faulty, the maintainer can contact the manufacture factory
according to the contact information of the device.
Location Set a character string to describe the physical location of the device.
SNMP Version Set the SNMP version run by the system.
Configuring an SNMP view
Creating an SNMP view
1. Select Device > SNMP from the navigation tree.
2. Click the View tab.
The view page appears.
Figure 62 View page
3. Click Add.
The Add View window appears.