310
Figure 322 Configure the AAA accounting method for the ISP domain
4. Configure wireless service
a. Select Wireless Service > Access Service from the navigation tree.
b. Click Add.
c. On the page that appears, set the wireless service name to mac-auth, select the wireless
service type clear, and click Apply.
Figure 323 Create a wireless service
5. Configure MAC authentication
After you create a wireless service, you enter the wireless service configuration page.
a. In the Security Setup area, select the Open-System from the Authentication Type list.
b. Select the Port Set box, and select mac-authentication from the Port Mode list.
c. Select the MAC Authentication box, and select system from the Domain list.
d. Click Apply.
To Next Page
Loading...
