420
Table 141 Configuration items
Item Descri
tion
Aging Time
Specify the aging time for multicast optimization entries. If the AP does not receive any
IGMP report from a client within the aging time, the AP removes the client from the
multicast optimization entry.
Multicast
Optimization Max
Clients
Specify the maximum number of clients supported by multicast optimization.
If a client joins multiple multicast groups, the client is counted as multiple clients in
multicast optimization statistics. For example, if a client has joined two multicast
groups, the client is counted as two clients in the multicast optimization statistics.
Max Client Limit
Exceeded Action
• Pause Multicast Optimization for All Clients—Invalidate the multicast optimization
function. A new client can join a multicast group and receive multicast packets, and
a multicast optimization entry can be created for the client. However, the multicast
optimization function for all clients in the multicast group becomes invalid. When
the number of clients drops below the upper limit, the multicast optimization
function takes effect again.
• Exclude New Clients for Multicast Optimization—Reject new clients. A new client
can join a multicast group, but no new multicast optimization entries can be
created. If multicast optimization entries have been created for other clients in the
multicast group, the client cannot receive multicast packets. If not, the client can
receive multicast packets.
By default, the multicast optimization function becomes invalid when the maximum
number of clients supported multicast optimization is reached.
4. Select the target wireless service.
5. Click Enable.
Displaying multicast optimization information
1. Select Advanced > Multicast Optimization from the navigation tree.
2. Click the target radio.
Figure 454 Displaying multicast optimization information
To Next Page
Loading...
