Hach sc100 1720E - Page 23

Installation
23
Figure 23 1720E Dimensions
POWER
STATUS
127.8 mm
(5.0 inches)
255.3 mm (11.05 inches)
217.2 mm (8.55 inches)
143.2 mm
(5.64 inches)
40.6 mm
(1.60 inches)
72.04 mm (2.84 inches)
107.95 mm (4.25 inches)
343.67 mm (13.53 inches)
19.72 mm
(0.78 inches)
238.35 mm (9.38 inches)
312.48 mm (12.30 inches)
273.05 mm (10.75 inches)
157.00 mm
(6.18 inches)
172.4 mm (6.79 inches)
2 Slots for
0.25 fastener²
Sample Inlet
¼-NPT to Compression fitting¼-
Cable
2 meters (6.6 feet)
Sample Drain
NPT to ½-ID Tubing hose Barb½-
Service Drain
1.00 I.D.
164.2 mm (6.46 inches)
193.7 mm (7.625 inches)
195.6 mm (7.70 inches)
Allow at least 254 mm (10.00 inches) above the instrument
for removal of the head assembly.