26
Section 4 Operation
4.1 Using the Keypad
The front of the controller is shown in Figure 26. The keypad consists of the eight
keys described in Table 8.
Figure 26 Front of the Controller
1. Instrument Display 4. Right, Left, Up, and Down keys 7. Enter key
2. Back key 5. IrDA (Infrared Data Acquisition) window
3. Menu key 6. Home key
Table 8 Controller Key Functions/Features
Number Key Function
2 Move back one level in the menu structure.
3
Move to the main menu from other menus. This key is not active in menus where a selection or other
input must be made.
4 Navigate through the menus, change settings, and increment and decrement digits.
5
Move to the Main Measurement screen from any other screen. This key is not active in menus where a
selection or other input must be made.
6 Accept an input value, updates, or accepts displayed menu options.
sc100
1
2
6
5
3
7
4
To Next Page
Loading...
