Operation
39
OVERFEED RESET
Reset the overfeed time out.
TEST OUTPUT
SELECT OUTPUT 1 or 2
User selectable mA value. 0–20 mA
TEST RELAY
SELECT RELAY A, B, or C
Energize or de-energize the selected relay.
RESET CONFIG
Reset to default configuration of the controller
SIMULATION
SELECT SOURCE, SET PARAMETER, SET SIM VALUE
Simulate sensor measurement values for testing the outputs and relays.
SCAN SENSORS
Manually scans for sensors to determine if sensors have been added or removed.
MODBUS STATS
Indicates the communication statistics for use with an external network.
CODE VERSION
Indicates the controller software version.
4.9.4 Test/Maint Menu (continued)
To Next Page
Loading...
