Häfele FT 200 User Manual (English)

Questions and Answers:

H
harriskatelynAug 12, 2025
What to do if Häfele Touch terminals locks do not open and the LED for the FAN 200 antenna does not switch from red to green?
- T
  Tracy Hernandez DDSAug 12, 2025
  If the Häfele Touch terminal locks aren't opening and the LED remains red, it could be due to several reasons. First, the user key may not be authorized, requiring you to program it. Second, the user key might be too far from the antenna; ensure it's within 25 mm. Other potential causes include a defective closing mechanism (check it), loose plug connections (check them), or a stiff locking mechanism (adjust it, paying attention to adjustments and tolerances).
B
birdcharlesAug 19, 2025
Why Häfele Touch terminals locks do not lock?
- K
  kthomasAug 19, 2025
  If the Häfele Touch terminal locks are not locking, several factors could be responsible. The user key may not be authorized, and you may need to program it. Also, check if the locking mechanism is being lowered after loading the furniture item and verify the loading of the furniture item. Ensure that plug connections are secure. Finally, the lock might be under tension, requiring adjustment of the locking mechanism while noting adjustments and tolerances.
D
Deborah WellsAug 27, 2025
What to do if Häfele FT 200 Controller has fault when opening?
- B
  Brian BrownAug 27, 2025
  If you are experiencing a fault when opening the Häfele Controller, it could be due to several reasons. First, ensure that the user key is programmed. The issue might arise if the user key isn't authorized. Also, check that the distance between the user key and the antenna is within the specified maximum of 25 mm. Other potential causes include a defective closing mechanism, loose plug connections, or a locking mechanism that is sticking or stiff. Inspect and adjust the locking mechanism, paying close attention to adjustments and tolerances.
K
Kathryn WilsonSep 3, 2025
Why Häfele FT 200 has fault when locking?
- A
  Angela AdamsSep 3, 2025
  If the Häfele Controller is showing a fault when locking, there are a couple of things to check. The locking mechanism may be under tension because of the furniture item load. You should check the loading of the furniture item. Also, ensure that all plug connections are secure.

Häfele FT 200 Specifications

General

Category	Controller
Manufacturer	Häfele
Model	FT 200
Protection Class	IP20
Weight	0.3 kg
Output Voltage	12 V DC

Häfele FT 200 User Manual

Table of Contents

Questions and Answers:

Häfele FT 200 Specifications