61
HDE 04.10.2021 732.22.024
6.3 Programming a user key with deadbolt lock function
Prerequisites: Programming key card User keys
1. Hold the programming key card in front of the
antenna.
Acoustic signal is heard. LED flashes green
for max. 5 seconds.
2. Hold the programming key card in front of the
antenna again during this 5-second period.
Acoustic signal is heard twice. LED flashes
green more slowly.
3. Hold the programming key card in front of the
antenna again during the 5-second period.
Acoustic signal is heard twice. LED flashes
green even more slowly.
4. Hold the user key in front of the antenna during
the 5-second period.
Acoustic signal is heard. Locking
authorisation is allocated.
5. Remove user key.
LED continues to flash green slowly.
6. Hold another user key in front of the antenna
during the 5-second period.
7. Repeat steps 4 to 6 until all necessary user keys have been granted the locking authorisation.
8. The LED switches to red once the 5 seconds have elapsed.
Tag-it ™ISO
5 s
2x/s2x
1x/s2x
1x/s
ins-src-732.22.024.book Seite 61 Mittwoch, 13. Oktober 2021 1:58 13
To Next Page
Loading...