Häfele FT 200 - Programming Permanent Deadbolt Lock Operation

65
HDE 04.10.2021 732.22.024
8.3 Programming permanent deadbolt lock operation
Prerequisites: Programming key card Clearing key card
1. Hold the programming key card in front of the
antenna.
Acoustic signal is heard. LED flashes in
green for 5 seconds.
2. Hold the clearing key card in front of the
antenna during this 5-second period.
Acoustic signal is heard. LED continues to
flash in green and then goes to continuous
red.
The FT 200 / FT 200 CAP is now set to
permanent deadbolt lock operation.
Tag-it ™ISO
Tag-it ™ISO
x
5 s
x
ins-src-732.22.024.book Seite 65 Mittwoch, 13. Oktober 2021 1:58 13