HDE 04.10.2021 732.22.024
58
6. Programming user keys
An authorised user key is needed to unlock a EFL 3 / EFL 3C lock. Locking authorisation must
be allocated to this user key.
The following user keys can be programmed:
User key Locking authorisa-
tion
Functionality
Normal user key Latchbolt lock
operation (with
self-locking action)
• Opens all locks for which the user key has locking
authorisation.
• Open locks then lock automatically once the open
time has elapsed.
Privileged user key Latchbolt lock
operation (with
self-locking action)
• Functions like a normal user key
• Also required by privileged persons for configuring
the furniture terminal with the MDU 110 data transfer
unit.
User key with
deadbolt lock function
Deadbolt lock
operation
(permanent open)
• Functions like a normal user key
• Also has a permanent open function: If the user key
is held in front of the antenna for a longer period, the
open locks are set to “permanent open”.
• Lock open locks by presenting a user key
authorised for the deadbolt lock function again
(> 2 sec.)
The locking authorisations for the user keys are retained after a power failure and do
not have to be reset.
ins-src-732.22.024.book Seite 58 Mittwoch, 13. Oktober 2021 1:58 13
To Next Page
Loading...