36
Operation
Driver's seat
The driver's seat (Fig. 20/1) must be ad-
justed so that the driver is seated com-
fortably and can reach all the operating
elements with ease.
• The seat suspension can be adapted
to the driver's weight (50 to 120 kg)
using the handwheel (A).
• The driver's seat is released by
means of the lever (B) and can be
adjusted in a longitudinal direction.
For reasons of safety, the vehi-
cle is equipped with a seat con-
tact switch. The vehicle can
only be started when the oper-
ator is sitting on the driver's
seat. If the seat contact is inter-
rupted, all the functions are
switched off and the operating
hour counter flashes.
Any attempt to manipulate the
seat contact switch can lead to
the vehicle being automatically
locked against use.
Fig.20
To Next Page
Loading...
