Handicare Simplicity+ - Fitting the Seat Upholstery

Figure 53Figure 52
Figure 54
MINIVATOR SIMPLICITY
+
INSTALLATION MANUAL 19
Fitting the seat upholstery
Fitting the seat upholstery
Items required: Tools required:
• Seat upholstery • Screw driver
1 Clip in the seat back, starting with the top
two clips (Figure 52) and then screw in the
seat belt cover mouldings (Figure 53).
2 Fit the main seat cushion.
3 Fit the seat flap cushion.
4 Fit the arm upholstery. Starting at the front,
press the upholstery into the arm recess.
(Figure 54).