2 MINIVATOR SIMPLICITY
+
INSTALLATION MANUAL
Pre-installation check list
1 Check that all of the required components
are available. You should have 7 boxes.
These are colour coded so that identification
of any handed components is simple. The
table below shows the colour of the boxes
that you require.
COMPONENT Left hand Right hand
Smart Seat base PURPLE GREEN
Smart Seat back
BLACK
Power pack
Fitting kit
Smart Seat Upholstery
Bottom Track Section
Top Track Section
e.g. a left hand lift comprises 1 purple and
6 black boxes; a right hand lift comprises
1 green and 6 black boxes.
2 Installation tools required
• Loading toggle • 2.5mm Allen key
• Shorting links • 3mm Allen key
• 10mm spanner • 4mm Allen key
• 10mm socket • 5mm Allen key
• Narrow nosed pliers • 6mm Allen key
• 13mm socket (ball ended)
• 17mm socket • 8mm Allen key
• Side cutters • Spirit level
• 8mm spanner • Handlamp
• 13mm spanner • Hacksaw
• 17mm spanner • Tin snips
• No. 2 Pozi-drive
Note: The installation engineer must check
with Minivator for the latest installation manual
issue number.
Minivator Simplicity
+
installation manual
Smart Seat
Issue No of this manual is 2011-1
ORIGINAL LANGUAGE ENGLISH
To Next Page
Loading...
