Handiquilter ProStitcher Lite - Page 20

Pro-Stcher Lite for the HQ Simply Sixteen Installaon Instrucons | 19
2. The blue Flexirack and the black gear need to be
aligned with one another. The blue Flexirack will
be mounted to the FRONT of the table. Starng
at one end of the table, begin mounng the blue
Flexirack to the front of the table while aligning
it to the front black gear on the Pro‑Stcher Lite
carriage.
 NOTE: Once you align the blue rack Flexirack
with the center of the black gear you may
nd it helpful to measure the distance
between the blue Flexirack and the track
support. With this dimension, you can create
a spacer to aid you in keeping the blue
Flexirack straight the enre length of the
table.
3. Use the carriage or spacer as a guide and align
the blue Flexirack with the black gear along
the length of the table while removing the pink
protecve layer a lile at a me and pressing
downward on the blue Flexirack while moving
down the enre length of the table.
4. Double‑check the alignment of the carriage
black gear with the blue Flexirack by rolling the
carriage along the enre length of the table.
Adjust as necessary to ensure they are aligned.
black gear
blue Flexirack
black gear
blue Flexirack