Water temperature gauge
When the ignition key switch is in the ┃ (open)
position, the water temperature gauge is active,
displaying the engine coolant temperature; in
normal operation the LCD will show that it is
within the range 50℃-110℃.
Caution
Stop operation immediately and reduce
engine speed to cool down the engine
and then stop the engine when the
liquid-crystal display is in the red area.
Check the coolant level is sufficient and
whether the fan belt is tight.
Fuel gauge
When the ignition key switch is in the ┃
(open) position, the fuel gauge will display the
approximate fuel quantity of the fuel tank.
It is recommended to fill up the fuel tank
everyday after work .
Stopwatch
When the ignition key switch is in the ┃
(open) position, the stopwatch will start
running. The stopwatch reading will increase by
one for every hour of operation.
The stopwatch displays the cumulative working
hours of the forklift truck.
Caution
After the cumulative hours reaches the
first 100h and 350h and a certain
period, the “wrench” icon will flash for
1 hour, this indicates that the forklift
truck needs to be serviced. See
monthly maintenance after the first
flash. See the detailed information
about the maintenance cycle schedule
for each cycle. The specific flash time
depends on the actual situation.
Charging indicator light
The light displays the battery charge status,
turns on when the starting switch is in the ┃
(open) position, and turns off when the engine
is started.
Caution
If the light continues to turn on or flash
during operation, it indicates that
charging is abnormal and immediate
inspection is required.
Engine oil pressure alarm indicator light
The light displays the pressure status of the
engine lubricating oil, the light turns on when
the starting switch is in the ┃ (open) position,
and turns off when the engine is started.
Caution
If the light continues to turn on or flash
during operation, it indicates that the oil
pressure is less than 0.05MPa and
immediate inspection is required.
To Next Page
Loading...
