fault light should turn on at the same time.
Inhibit indicator light
When the light turns on, it indicates that the
regen status of the engine is restricted and
driving regen or parking regen is inhibited.
Caution
When working in an environment that is
not suitable for DPF regeneration, turn
on the inhibit mode. After leaving,
release the inhibit mode so that active
regeneration can continue.
Caution
If the active regen has been inhibited,
the exhaust filter and exhaust will
become blocked and the performance of
the forklift truck will be degraded until
the engine fault indicator light is
activated.
High exhaust temperature indicator light
W98/W97 Engine: The indicator light turns on
Caution
Reminds the driver that the regen
process causes high exhaust
temperature and to pay attention to
safety.
To Next Page
Loading...
