HANGCHA CPCD15 - Page 86

80
Regular Maintenance Schedule for the Lifting System
Maint
enanc
e
Item
Maintenance Content
Tool
Daily
(8h)
Every month
and a half
(250h)
Trimonthl
y
(500h)
Semi-annu
ally
(1,000h)
Annually
(2,000h)
Chain
.
,
Chain
wheel
Check the tension of the
chain and check for any
deformation, damage or
rust.
○
○
○
○
○
Lubricate the chain
○
○
○
○
Check the riveted pin for
any looseness
○
○
○
○
Check the chain wheel for
any deformation or damage
○
○
○
○
Check the chain wheel gear
for any looseness
○
○
○
○
Acces
sories
Check the operating status
○
○
○
○
Liftin
g
cylind
er
.
Check the piston rod, the
thread and joint for any
looseness, deformation or
damage.
Inspecti
on
hamme
r
○
○
○
○
○
Check the operating
condition
○
○
○
○
○
Leakage
○
○
○
○
○
Check the pin and
steel-backed bearing of the
cylinder for any abrasion or
damage
○
○
○
○
Hydra
ulic
.
pump
Check the hydraulic pump
for any leakage or noise
○
○
○
○
○
Check the driving gear of
the hydraulic pump for any
wear and tear
○
○
○
○
Fork
.
Check the forks for any
damage, deformation or
wear
○
○
○
○
○
Check the stop dowel for
any damage or wear
○
○
○
Check the welded part of
the hook at the base of the
fork for any cracks or wear
○
○
○
○