HANGCHA CPCD15 - Page 87

81
Maint
enanc
e
Item
Maintenance Content
Tool
Daily
(8h)
Every month
and a half
(250h)
Trimonthl
y
(500h)
Semi-annu
ally
(1,000h)
Annually
(2,000h)
Uprig
ht
moun
ting
Fork
arm
.
Check the welding between
the inner/outer mast and
beam for any cracks or
damage
○
○
○
○
Check the welding between
the tilt cylinder frame and
mast for any poor welding,
cracks or damage
○
○
○
○
Check the inner/outer mast
for any poor welding, cracks
or damage
○
○
○
○
Check the fork arm for any
poor welding, cracks or
damage
○
○
○
○
Check the roller for any
looseness
○
○
○
○
Check the bearing shaft
bush of the mast for any
wear or damage
○
Check the bearing cap bolts
of the mast for any
looseness
Inspecti
on
hamme
r
○
First time
○
○
○
Check the bolts at the
bottom of the lifting
cylinder, bolts at the top of
piston rod, U-bolts and the
bolts of the movable beam
guide rail for any looseness
Inspecti
on
hamme
r
○
First time
○
○
○
Check the roller, roller shaft
and welding for any cracks
or damage
○
○
○
○
Regular Maintenance Schedule for the Safety Devices and Accessories