100Nickel LR
• Add 1 mL of HI 93740B 0.3% PAN
solution to each beaker, cap and
swirl to mix.
• Press TIMER and the display will show a countdown prior to
adding reagent C or, alternatively, wait for 15 minutes. Then, in
both cases, add one packet of HI 93740C EDTA reagent to each
beaker, cap and swirl to mix until complete dissolution.
• Fill one cuvet up to the mark with 10 mL of
the blank.
• Place the cuvet into the holder and
ensure that the notch on the cap is
positioned securely into the groove.
• Press ZERO and "SIP" will appear on the display.
• Wait for a few seconds and the display will
show "-0.0-". Now the meter is zeroed and
ready for measurement.
• Fill a second cuvet up to the mark with 10 mL
of the reacted sample.
• Insert the second cuvet into the in-
strument.
10 mL
10 mL
To Next Page
Loading...
Need help?
General
