117
DISSOLVED OXYGENDISSOLVED OXYGEN
DISSOLVED OXYGENDISSOLVED OXYGEN
DISSOLVED OXYGEN
SPECIFICATIONS
Range 0.0 to 10.0 mg/L
Resolution 0.1 mg/L
Accuracy ±0.4 mg/L ±3% of reading
Typical EMC ± 0.1 mg/L
Deviation
Light Source Tungsten lamp with narrow band interference
filter @ 420 nm
Method Adaptation of the Standard Methods for the
Examination of Water and Wastewater, 18
th
edition, Azide modified Winkler method. The
reaction between dissolved oxygen and the reagents
causes a yellow tint in the sample.
REQUIRED REAGENTS
Code Description Quantity
HI 93732A-0 Reagent A 5 drops
HI 93732B-0 Reagent B 5 drops
HI 93732C-0 Reagent C 10 drops
REAGENT SET
HI 93732-01 Reagents for 100 tests
HI 93732-03 Reagents for 300 tests
For other accessories see page 141.
MEASUREMENT PROCEDURE
• Select the program number corresponding to Dissolved Oxygen on
the secondary LCD by pressing PROGRAM W and V.
• Fill one 60 mL glass bottle completely with the
unreacted sample.
• Replace the cap and ensure that a small part of the sample spills
over.
• Remove the cap and add 5 drops of
HI 93732A and 5 drops of
HI 93732B.
x 5
x 5
Dissolved Oxygen