To Next Page

To Previous Page

HYDRAZINEHYDRAZINE

HYDRAZINE

Hydrazine

SPECIFICATIONS

Range 0 to 400 µg/L

Resolution 1 µg/L

Accuracy ±4% of full scale

Typical EMC ±2 µg/L

Deviation

Light Source Tungsten lamp with narrow band interference

filter @ 420 nm

Method Adaptation of the ASTM Manual of Water and

Environmental Technology, method D1385-88,

p-Dimethylaminobenzaldehyde method. The reac-

tion between hydrazine and the liquid reagent

causes a yellow tint in the sample.

REQUIRED REAGENT

Code Description Quantity

HI 93704-0 Liquid Reagent 24 drops

REAGENT SETS

HI 93704-01 Reagents for 100 tests

HI 93704-03 Reagents for 300 tests

For other accessories see page 141.

MEASUREMENT PROCEDURE

• Select the program number corresponding to Hydrazine on the

secondary LCD by pressing PROGRAM W and V.

• Fill one cuvet up to the mark with 10

mL of distilled water.

• Place the cap and insert the cuvet

# 1 into the holder. Ensure that

the notch on the cap is positioned

securely into the groove.

• Press ZERO and SIP will blink while the

instrument is adjusting the light level.

10 mL

# 1

Hanna Instruments C 99 series User Manual

Questions and Answers: