To Next Page

To Previous Page

136

• Press TIMER and the display will show the countdown prior to the

measurement or, alternatively, wait for 3 minutes and 30 seconds

and press READ DIRECT. In both cases "SIP" will blink during

measurement.

• The instrument directly displays concentration in mg/L of zinc on

the Liquid Crystal Display.

INTERFERENCES

Interference may be caused by:

Aluminum above 6 mg/L

Cadmium above 0.5 mg/L

Copper above 5 mg/L

Iron above 7 mg/L

Manganese above 5 mg/L

Nickel above 5 mg/L

Zinc

Hanna Instruments C 99 series User Manual

Questions and Answers: