Measuring with pH & ORP Probes 118
21.2.5. Flow‑cell Installation
Do not allow deposits of sediment or other foreign material to accumulate within the sensing area.
TANK
VALVE 1
VALVE 2
FLOWFLOW
INCOMING FLOW
EXIT FLOW
3
1
2
4
5
7
6
6
FLOW CELL
1 Process controller
2 Wiring cable
3 pH probe
4 Flow‑cell adapter
5 Flow cell
6 Flow‑cell valves
7 Saddle
21.3. CONFIGURABLE MEASUREMENT PARAMETERS
Resolution
Option: 0.01 pH, 0.1 pH
• With Resolution selected, press Modify.
• Use the
ud keys to navigate between the two possible options.
Note: Resolution only affects the displayed pH measurement.
To Next Page
Loading...
