Hanna Instruments HI520 - Electrode Cleaning Solutions; Patch Cables; Electrode Holders

163 Accessories
28.6. ELECTRODE CLEANING SOLUTIONS
Ordering Information Product Description Quantity
HI7061M or HI7061L General cleaning solution 230 or 500 mL
HI7073M or HI7073L Protein cleaning solution 250 mL+3 sachets or 500 mL +6 sachets
HI7074M or HI7074L Inorganic cleaning solution 250 or 500 mL
HI7077M or HI7077L Oil & fat cleaning solution 250 or 500 mL
28.7. PATCH CABLES
Ordering Information Product Description
HI76510‑05 Patch cable, 5 m (16’5”)
HI76510‑10 Patch cable, 10 m (32’9”)
HI76510‑15 Patch cable, 15 m (49’2”)
HI76510‑25 Patch cable, 25 m (82’)
HI76510‑50 Patch cable, 50 m (164’)
28.8. ELECTRODE HOLDERS
Ordering Information Product Description
HI60501 PVC immersion electrode holder
HI60503 PVDF immersion electrode holder
HI60542 In‑line electrode holder, direct pipe installation
Specifications
Material Temperature Immersion length Pressure
Body O‑ring Min. Max. Min. / Max. Max.
HI60501 PVC NBR –10 °C (14 °F) 60 °C (140 °F)
10 cm / 69 cm
(3.9” / 27.1”)
N/A
HI60503 PVDF NBR –15 °C (5 °F) 100 °C (212 °F)
HI60542 PVC NBR –10 °C (14 °F) 60 °C (140 °F) N/A
8 bar (116 psi)
at 25 °C (77 °F)
3 bar (43.5 psi)
at 50 °C (122 °F)
Accessories
Ordering Information Product Description Quantity
HI60501‑0 O‑rings for HI60501 electrode holder 1 set
HI60501‑2 PVC protective end cap, inside height 68 mm (2.6”) 1 pc.
HI60503‑2 PVDF protective end cap, inside height 68 mm (2.6”) 1 pc.
HI605011 PVC mounting flange for HI60501 electrode holder 1 pc.