Hanna Instruments HI520 - USB-C Port

Controller Basics 14
Symbol Example Function
Ж
Ж
Ф
Б
б
7.37
50.1
pH
°C
Measure pH
Displayed next to the reading (e.g. temperature reading),
indicates Alarm High on the parameter.
З
З
Ф
Б
б
7.43
0.0
pH
°C
Measure pH
Displayed next to the reading (e.g. temperature reading),
indicates Alarm Low on the parameter.
c
Fatal error screen.
Press
h and follow the displayed instructions.
Й
Б
Ф
У
Йа
6.43
401
25.0
25.0
pH
mV
°C
°C
pH & ORP
The controller is connected remotely via RS‑485 to a Modbus server.
Л
Б
Ф
У
Ла
6.43
401
25.0
25.0
pH
mV
°C
°C
pH & ORP
The controller is connected remotely via RS‑485 to a Modbus server
and is in Remote Edit Mode.
3.4. USB‑C PORT
The USB‑C port is located on the right side of the controller.
Users can connect a USB flash‑drive (directly or through an adapter) or a cable to this port.
Note: The flash drive should not be pulled out of the USB-C port while it is still in operation.
USB
1
32
1 USB‑C port
2 Cable glands
3 Venting element
Figure 3: Side View: USB‑C Port & Venting Element