51 Outputs
10.2. ANALOG OUTPUTS
Note: Controller model determines the number of relays and analogs.
Navigation
• From Analog Outputs, press Setup.
• Press the
ud keys to navigate between parameters.
Enable
b
Setup
Enable
b
Setup
ud
• Press the b key to return to the menu without saving.
• At prompt, enter the passcode.
• At prompt, with the password enabled, select YES to place unit in HOLD and start modifying parameters
Note: We suggest users make configuration changes from the beginning of this Menu structure going forward,
because of the menu references parameters that were set earlier in the submenu.
Mode
Option: Disabled, Track Channel
With Mode selected, press Modify to toggle options.
Disabled indicates that analog output has not been allocated to any function .
With Track Channel selected the analog output follows a specific parameter.
Data Channel
Option: CH1, CH2, Math channel
To Next Page
Loading...
