73 General Settings
16. GENERAL SETTINGS
Navigation
• With item selected, press Setup to enter screen.
Enable
b
Setup
• Use the ud keys to navigate.
• Press the
b key to return to the menu without saving.
• At the prompt, enter the passcode.
• At the prompt, select YES to place unit in HOLD.
• Press the corresponding virtual key (bottom right hand side of the screen) to confirm selection.
Note: Settings will only be saved by selecting YES in the Menu exit screen warning.
Log Interval
Option: 10 s, 30 s; 1, 2, 5, 10, 15, 30, 60, 120, 180 minutes
• With parameter selected, press Modify for the drop‑down list to display.
• Use the
ud keys to navigate between options.
• Press Select to save.
LCD Contrast
Option: 0 to 100 %
• With item selected press Set for the horizontal scroll bar that shows the contrast level to display.
• Press the
ud keys to increase or decrease the value (keep the key pressed to fast‑forward).
• Press CFM to save.
To Next Page
Loading...
