Log Recall 72
To exemplify how the log event system works:
For Setup event code 21 Set point 1 status; with old value 0 (disabled) and new value 1 (Enabled)
For Setup event code 22 Set point 2 status; with old value 22 (disabled) and new value 2 (Enabled)
For Setup event code 34 Set point 2 parameter; with old value 0 main reading (pH or ORP) and new
value 1 (Temperature)
For Setup event code 45 Set point 1 parameter; with old value 8.00 and new value 8.39
Figure 22: Event logging example
To Next Page
Loading...
