71 Log Recall
Code Setup Parameter
141 Cleaning schedule interval 1, enabled
142 Cleaning schedule interval 2, enabled
143 Cleaning schedule interval 3, enabled
144 Schedule day, Monday
145 Schedule day, Tuesday
146 Schedule day, Wednesday
147 Schedule day, Thursday
148 Schedule day, Friday
149 Schedule day, Saturday
150 Schedule day, Sunday
152 Input 1 function
153 Input 1 active level
154 Input 2 function
155 Input 2 active level
173 Relay 1 function
174 Relay 2 function
175 Relay 3 function
176 Relay 4 function
177 Relay 5 function
178 Hold function enable
179 Hold Input enable
180 Hold Output enable
181 Manual hold
182 Hold Delay
183 Analog out 1, mode
184 Analog out 2, mode
185 Analog out 3, mode
186 Analog out 4, mode
187 Analog out 1, data channel
188 Analog out 2, data channel
189 Analog out 3, data channel
190 Analog out 4, data channel
191 Analog out 1, parameter to follow
192 Analog out 2, parameter to follow
193 Analog out 3, parameter to follow
194 Analog out 4, parameter to follow
Code Setup Parameter
195 Analog out 1, output range
196 Analog out 2, output range
197 Analog out 3, output range
198 Analog out 4, output range
199 Analog out 1, value for maximum output
200 Analog out 2, value for maximum output
201 Analog out 3, value for maximum output
202 Analog out 4, value for maximum output
203 Analog out 1, value for minimum output
204 Analog out 2, value for minimum output
205 Analog out 3, value for minimum output
206 Analog out 4, value for minimum output
207 Analog out 1, value for Hold is the fixed value
208 Analog out 2, value for Hold is the fixed value
209 Analog out 3,value for Hold is the fixed value
210 Analog out 4, value for Hold is the fixed value
211 Analog out 1, out value when in Hold
212 Analog out 2, out value when in Hold
213 Analog out 3, out value when in Hold
214 Analog out 4, out value when in Hold
215 Analog out 1, out 22 mA on alarm
216 Analog out 2, out 22 mA on alarm
217 Analog out 3, out 22 mA on alarm
218 Analog out 4, out 22 mA on alarm
219 Analog out 1, fixed value selection
220 Analog out 2, fixed value selection
221 Analog out 3, fixed value selection
222 Analog out 4, fixed value selection
224 Serial communication, Baud Rate
225 Serial communication, Parity
226 Serial communication, RemLink
_
Timeout
227 Serial communication, RemEdit
_
Timeout
228 Serial communication, Stop Bits
301– 311 Probe 1 parameter 1–11 was changed
312– 322 Probe 2 parameter 1–11 was changed
To Next Page
Loading...
