General Settings 74
LCD Backlight
Option: 0 to 100 %
•
With item selected, press Set to open for the horizontal scroll bar that is used to adjust the backlight to display.
• Press the ud keys to increase or decrease the value (keep the key pressed to fast‑forward).
• Press CFM to save.
LCD ShutOff Time
Option: 10 min, 30 min, 60 min, Disabled
• With item selected, press Modify, for the drop‑down list to display.
• Use the
ud keys to navigate between options.
• Press Select to save.
Key Beep
Option: Enabled, Disabled
With item selected, press the corresponding virtual key to toggle between options. An acoustic signal confirms
the enabled parameter.
Alarms & Errors Beep
Option: Enabled, Disabled
With item selected, press the corresponding virtual key to toggle between options. The check mark confirms
the enabled parameter.
Warning! When enabled, if the measurement is in alarm, a very loud beep will come from controller. Turn on
Manual Hold to subdue this Alarm state.
To Next Page
Loading...
