Dear Customer,
Thank you for choosing a Hanna Instruments
®
product.
Please read this instruction manual carefully before using this instrument as it provides the necessary information
for correct use of this instrument, as well as a precise idea of its versatility.
This manual has been written for HI520 Dual‑Channel Process Controller with software version v1.00 and higher.
It contains information that applies to setup, installation, and operation of HI520‑0320 or HI520‑0540 controller
paired with probes from following configurable series:
Configurable probe* series Parameter
HI10x6‑y8zz
HI1026‑1803
HI1126‑1805
pH
pH Meat
pH General Food Applications
HI20x4‑y8zz ORP
HI7630‑y8zz Conductivity
HI7640‑18zz Galvanic Dissolved Oxygen
HI7640‑58zz Optical Dissolved Oxygen
* Sold separately. Refer to probe manuals for specifications, installation, and application fields.
x, y, zz configurable options. See 2.2 Supported Probe Series Configurations for details.
If you need additional technical information, do not hesitate to e‑mail us at tech@hannainst.com.
Visit www.hannainst.com for more information about Hanna Instruments and our products.
All rights are reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner,
Hanna Instruments Inc., Woonsocket, Rhode Island, 02895, USA. Hanna Instruments reserves the right to modify the design,
construction, or appearance of its products without advance notice.
To Next Page
Loading...
