IMS-640/641 VoIP Intercom Master Station Operating Instructions MicroComn DXL
Page 7 MN-DXL-IMS-640/641-1.0
you initiate a call to the Intercom Station, or
you acknowledge a call request. (In this case, the Master Station is automatically connected to the
Intercom Station.)
When you call an Intercom Station, a call announce tone sounds (this indicates to the party at the Intercom
Station that you are calling, or that you have acknowledged the call request).
Note: An Intercom Station cannot initiate a conversation with the Master Station. The Intercom Station
can only communicate with the Master Station when the Master Station calls the Intercom Station, or
acknowledges a call request from an Intercom Station.
Station Identification
When the system is initially set up the using the Administrator Software stations will be identified by an ID
number and name. The IMS-640/641 LCD screen will display both.
Station Priority
Each Station is assigned a call request priority in the Administrator Software. Call request priority determines the
order in which Stations that have initiated call requests are displayed on the Event Queue.
A new call request with a high priority will appear on the Event Queue ahead of previously received call requests
with lower priority.
IMS-640/641 VoIP Intercom Master
Station
The IMS-640/641 Intercom Master Station is a
telephone style master station and includes:
a display,
a keyboard,
a beeper
a loudspeaker and microphone, and
a handset
IMS 640/641 Intercom Master Station
To Next Page
Loading...
Need help?
General