IMS-640/641 VoIP Intercom Master Station Operating Instructions MicroComm DXL
MN-DXL-IMS-640/641-1.0. Page 2
other system devices such as paging speakers, page zone expanders (PZE), talk back expanders (TBE),
program sources, telephone type stations, etc.
All of these elements are linked together in a communications network.
The Master Station
You can use your IMS-640/641 Master Station to perform a wide range of intercom and alarm functions. From
your Master Station you can:
call an Intercom Station
call another Master Station
respond to an intercom call request
disable an Intercom Station or alarm monitor point
(re)enable an Intercom Station or alarm monitor point
monitor the intercom status of every Intercom Station that is connected to your Master Station
make public address announcements to Intercom Station and loudspeaker zones
turn program distribution to Intercom Stations and zones on or off
This Operating Manual
This operating manual is designed to help you learn to use all of the important features of your Intercom Master
Station. It will also serve as a handy reference document.
The manual is divided into eight sections, each one dealing with a key aspect:
Section 1 Introduction
Section 2 Getting Started
Section 3 Principles of Operation
Section 4 Intercom Procedures
Section 5 Enabling and Disabling Stations
Section 6 Monitoring Procedures
Section 7 Alarm Handling Procedures
Section 8 Other Master Station Procedures
Remember that the DXL is an intercom system designed to help you do your job more effectively.
The more familiar you are with its operation, the easier your job will be!
To Next Page
Loading...
Need help?
General