Harding Instruments MicroComm DXL User Manual

IMS-640/641 VoIP Intercom Master Station Operating Instructions MicroComn DXL
Page 21 MN-DXL-IMS-640/641-1.0
Master Station “Idle”
menu.
When “Call” is pressed, the above
choices appear
.
Section 4 - Intercom Procedures
How to Select a List
You can select a list through the Call, Signal, Control, and Monitor
functions on the“Idle menu”. Which function key you choose is based
upon the operation you wish to perform.
Once you select one of the functions you wish to perform, the list of
available devices you can select is displayed.
For example, if you select the Call function, you can then select whether
you wish to call a Master Station, Paging Zone, Intercom Station or
Visiting Booth.
If you decide to call an Intercom Station, press the Station function key to display the Intercom Stations that are
available for your master station.
Jul 8, 2008
Master Setup
Answer Next
Master Station #20
Unman
Call
0
01:51 PM 0
0
Jul 8, 2008
Zone
Master
Master Station #20
Station
Last
0
01:51 PM 0
0

Harding Instruments MicroComm DXL Specifications

General

Brand	Harding Instruments
Model	MicroComm DXL
Category	Intercom System
Language	English