IMS-640/641 VoIP Intercom Master Station Operating Instructions MicroComm DXL
MN-DXL-IMS-640/641-1.0. Page 24
To access the Station List press Call
followed by Station. Now select the Station
you want from the Station List.
Station List
Press “End Call”’ when you have
completed the call
Making a Call to a Station
This procedure is used for making a call to an Intercom Station.
You may call an Intercom Station from any list on which it appears.
Reminder: When you acknowledge a call request from the Event Queue, you will automatically be
connected to the Intercom Station.
Caution: If you call a station from the Station List or from the Disabled List and that station is also listed
on the Event Queue, the system will treat your call as though you had acknowledged the call request.
In this example, we will make a call from the Station List.
When you press the Accept function key the screen displays the ID
Number and Name of the station you are calling. You are now connected
to the station.
Through the loudspeaker, handset, or headset, you will be able to hear the
audio at the station.
To speak to the intercom, use the station mic (located next to the
loudspeaker), the handset, or the headset.
When you have finished your conversation, press the End Call function
key. You will return to the Main Menu.
2002
Housing1Exit
0
Reject
Master Station #20
Accept
Station :131
2003 UnitAEntry 0
2001
Housing1Entry 0
Station #2001
My Volume
Master Station #20
Their Volume
End Call
Housing1Entry
Connected to: 0
0
0
To Next Page
Loading...
Need help?
General